To get your V2 plug to act as a repeater in ST's you need to follow these steps. 1. Remove it from IRIS. (Very important step) 2. Hold in the button on the front of the device as you plug it in and release it when it turns blue while pairing it to ST's. It should blink blue while pairing.. 3. Once it shows up as a device go back and add it again. Make sure the blue light is on. 4. This time while pairing press the button on the device fast eight times. It should now show up as a z-wave repeater in your devices. I had to do this a few times but all 12 of my devices now show up as a plug and a z-wave repeater.
... View more